Incoloy 330 Round Bar
Review dimensions, condition and technical requirements for Incoloy 330 Round Bar.
View productStainless Steel Round Bar | Duplex Steel Round Bar | High Nickel Alloy Round Bar
Manufacturer · Exporter · Supplier
Inconel and Incoloy round bars cover several nickel-containing alloy families used for heat, corrosion and demanding mechanical service. Their compositions and heat treatments differ: some grades resist oxidation or chemical attack, while others are designed for elevated-temperature strength or precipitation hardening. The correct bar must be selected by its exact alloy designation, service conditions and product standard.

Product discovery
Compare 11 products below, then send your grade and size requirements.
Review dimensions, condition and technical requirements for Incoloy 330 Round Bar.
View product →Review dimensions, condition and technical requirements for Incoloy 800 Round Bar.
View product →Review dimensions, condition and technical requirements for Incoloy 800h Round Bar.
View product →Review dimensions, condition and technical requirements for Incoloy 800ht Round Bar.
View product →Review dimensions, condition and technical requirements for Incoloy 825 Round Bar.
View product →Review dimensions, condition and technical requirements for Incoloy 925 Round Bar.
View product →Review dimensions, condition and technical requirements for Inconel X-750 Round Bar.
View product →Review dimensions, condition and technical requirements for Inconel 600 Round Bar.
View product →Review dimensions, condition and technical requirements for Inconel 601 Round Bar.
View product →Review dimensions, condition and technical requirements for Inconel 625 Round Bar.
View product →Review dimensions, condition and technical requirements for Inconel 718 Round Bar.
View product →No matching product is shown. Check the spelling or send the governing designation with your enquiry.
Category selection guide
Choose the product record that matches the grade or designation in the governing document. Then confirm the product standard, size, condition, finish, tolerance, testing, and documentation instead of relying on the category name alone.
Nickel alloy technical guide
Inconel and Incoloy round bars are used where ordinary steels may not provide the required resistance to heat, corrosion or mechanical loading. The names cover several different nickel-containing alloys, so the material designation matters more than the brand family alone. Some grades resist furnace oxidation, some are selected for chemical-processing service, and others develop high strength through controlled ageing.
The 11 linked grades below include nickel-chromium alloys, iron-nickel-chromium alloys and precipitation-hardenable materials. Each should be specified by grade or UNS number, applicable product standard, dimensions and delivery condition.
These grades are best compared by intended service rather than by name alone. This table links directly to the existing product pages.
| Alloy grade | Principal material feature | Typical selection focus |
|---|---|---|
| Inconel 600 | Nickel-chromium-iron alloy | Resistance to heat and selected corrosive environments |
| Inconel 601 | Chromium-nickel alloy with aluminium | Oxidation resistance in high-temperature equipment |
| Inconel 625 | Nickel-chromium-molybdenum-niobium alloy | Localized-corrosion resistance and useful strength |
| Inconel 718 | Age-hardenable nickel alloy | High-strength mechanical components |
| Incoloy 330 | Iron-nickel-chromium alloy | Oxidation and carburization resistance in thermal processing |
| Incoloy 800 / 800H / 800HT | Iron-nickel-chromium 800 family | Elevated-temperature service; grade-specific creep requirements |
| Incoloy 825 | Nickel-iron-chromium alloy with Mo and Cu | Chemical-process corrosion resistance |
| Incoloy 925 | Age-hardenable nickel-iron-chromium alloy | Strength together with corrosion resistance |
| INCONEL X-750 | Age-hardenable nickel-chromium alloy | High-temperature springs and fasteners where specified |
Designation note: X-750 is properly known as INCONEL alloy X-750 (UNS N07750). Its existing product URL has been retained so existing links do not change.
Although these alloys share nickel-rich compositions, their design priorities are not the same. Selecting only by a higher alloy number can result in the wrong material.
| Grade | Key distinction | Where it is often considered |
|---|---|---|
| 600 | Nickel-chromium alloy with general heat and corrosion resistance | Heat-processing equipment and specified chemical duties |
| 601 | Aluminium addition supports a protective high-temperature oxide scale | Furnace and thermal-processing components |
| 625 | Molybdenum and niobium provide corrosion resistance and solid-solution strengthening | Chemical and marine-service hardware |
| 718 | Strength is developed through controlled precipitation-hardening heat treatment | Highly loaded fasteners and aerospace-related parts |
The 800 series is often considered for elevated-temperature equipment, while 825 is principally a corrosion-resistant alloy. The letters H and HT on the 800 family identify material requirements that should not be ignored during purchasing.
| Grade | UNS | Important distinction |
|---|---|---|
| Incoloy 800 | N08800 | General 800-family material for elevated-temperature applications |
| Incoloy 800H | N08810 | Composition and grain-size requirements relevant to creep-resistant service |
| Incoloy 800HT | N08811 | Tighter chemistry and processing requirements for specified high-temperature conditions |
| Incoloy 825 | N08825 | Molybdenum and copper for resistance in certain chemical environments |
Different nickel-alloy grades can be covered by different rod-and-bar specifications. The applicable specification must match the exact UNS number and the requested product form. The table gives common references, not a substitute for the purchase-order standard.
| Alloy / grade | Common rod or bar specification | What to verify |
|---|---|---|
| Inconel 600 / 601 | ASTM B166 / B166M | Grade and dimensional requirements |
| Inconel 625 | ASTM B446 | UNS N06625 and specified condition |
| Inconel 718 / X-750 | ASTM B637 | Heat-treatment condition and mechanical requirements |
| Incoloy 800 / 800H / 800HT | ASTM B408 | Correct UNS grade and temperature-related requirements |
| Incoloy 825 | ASTM B425 | Correct grade, size and material condition |
| Incoloy 330 / 925 | Confirm applicable grade-specific standard | Do not apply standards from other nickel alloys automatically |
Heat treatment is one of the most important differences across this category. Inconel 625 is normally associated with solid-solution strengthening, while 718, X-750 and 925 may obtain much of their mechanical strength through precipitation-hardening treatments. The required condition must be agreed before comparing tensile or yield values.
For 800H and 800HT, composition and processing requirements are important to elevated-temperature design. A general-purpose bar certificate is not necessarily sufficient for creep-related service. Material test certificates should identify the correct grade and condition.
Nickel-alloy bars can be hot worked, forged, peeled, turned, ground or cold finished depending on the alloy, dimensional requirements and intended component. Surface condition, straightness, machining allowance and final diameter tolerance should be specified where relevant.
Machining can be more demanding than for ordinary carbon steels because some nickel alloys work-harden rapidly. Appropriate tooling, cutting methods and coolant practices help maintain dimensional accuracy and surface quality.
| Service requirement | Commonly considered grades | Example components |
|---|---|---|
| High-temperature oxidation | 601, 330, 800 family | Furnace fixtures and heat-treatment equipment |
| Chemical-processing corrosion | 625, 825 | Valve parts, pump components and process-equipment hardware |
| High-strength or age-hardened service | 718, 925, X-750 | Fasteners, shafts, springs and heavily loaded components |
| General heat-resistant construction | 600, 800 | Thermal-processing parts and selected equipment fittings |
Application examples are indicative, not blanket approvals. Selection must account for the actual medium, temperature, loading, applicable code and any customer-specific material restrictions. Other nickel-alloy families can be reviewed under Hastelloy Round Bar and Nickel Round Bars.
A complete requirement should state the exact alloy and UNS designation, ASTM or other governing specification, diameter, length, quantity, heat-treatment or delivery condition, tolerances, surface finish and required inspection documents. For critical use, confirm traceability, mechanical testing, additional examination and any project code requirements before ordering.
Material questions
No. They refer to several different nickel-containing alloys. For example, Inconel 625 and Incoloy 825 have different compositions and are chosen for different operating conditions.
625 is usually selected for its corrosion resistance and solid-solution strength. 718 is a precipitation-hardenable grade used where higher mechanical strength is required after specified heat treatment.
Not automatically. They have different chemistry and processing requirements. The specified UNS grade and certified material condition must match the purchase requirement.
ASTM B446 is a common product standard for Inconel 625 rod and bar. The applicable edition, condition and project requirements must also be checked.
X-750 is commonly designated INCONEL alloy X-750, UNS N07750. It is a precipitation-hardenable nickel-chromium alloy.
Specify grade and UNS number, governing standard, diameter, length, quantity, material condition, tolerances, finish, testing and required certification.
Specification-led enquiries
Send the grade or standard, dimensions, quantity, condition, testing requirements, documentation, and destination.
