stainless steel round bar | stainless steel rods| steel bar | steel round bar | ss round bar| 1045 round bar | a36 round bar | 1018 round bar| Alloy steel round bar manufacturer & supplier

Stainless Steel 17-4 PH Bar Supplier

DIN 1.4542 SS Bars, 17-4PH Steel Hollow Bars, Steel 17-4PH Flat Bar, 17-4PH Stainless Steel Black Bar Supplier, ASTM A276 AISI 17-4PH Stainless Steel Round Bars.

ASME /EN/ BS SS 17-4PH Rectangular Bar, 17-4PH Stainless Cold Finish Round Bar, Steel S17400 Bright Bar, Stainless Steel 17-4PH Square Bar.

Table of Content

astm a276 17-4 PH stainless steel round bars manufacturer in india

WHAT IS STAINLESS STEEL 17-4 PH BAR?

Piyush Steel is KNPC approved & NTPC approved Manufacturer of DIN 1.4542 SS Bars. We are the Only Indian to get BHEL approved & GASCO approved Supplier of Steel 17-4PH Flat Bar. Piyush Steel is India’s 3rd Largest Exporter of 17-4PH Steel Hollow Bars. In the year 2000 We Become ISO 9001;2008 Certified Manufacturer of 17-4PH Stainless Steel Black Bar. Later in the same year we were honoured by Saudi Aramco Approved Manufacturer of Steel 17-4PH Flat Bar. We are Crisil Rated Manufacturer of ASTM A276 AISI 17-4PH Stainless Steel Round Bars, With the help of Expert Working on Our Mill we Were honoured by NORSOK approved Manufacturer of ASME /EN/ BS SS 17-4PH Rectangular Bar. We are one of the oldest Manufacturer of 17-4PH Steel Hollow Bars. Piyush steel is PED approved Manufacturer of 17-4PH Stainless Cold Finish Round Bar and SSi approved Manufacturer of Stainless Steel 17-4PH Square Bar. in the year 1999 we were recognised as ONGC approved Exporter of Steel S17400 Bright Bar. We are the First Indian to get ISO 14000 certified Supplier of DIN 1.4542 SS Bars.

Bright Round Metric (BRM), also known as Bright Round Bar, Metric Bright Round Bar, Bright Bar, Round Bright Steel Bar in stock for next day delivery.

Imperial Rounds (SR), also known as Stainless Bar, Stainless Round Bar, Stainless Rod, in stock for next day delivery.

SS 17-4 PH BAR SPECIFICATIONS:

  • UNS = Unified Numbering System
  • TYPE = Commonly used grade name
  • AMS = Aerospace Society for Testing and Materials
  • ASTM = American Society for Testing and Materials
  • FEDERAL = Federal specifications
Standard
ASTM A 276, A 479
ASME SA 276, SA 479
Material
SS 17-4PH
DIN 1.4542
UNS S17400
SUS 630
Inox 904L
Stainless Steel Round Bar type
17-4 PH stainless steel round bars
Standards

ASTM A276, A479, A582, GB4226-84, GB/T1220-2007, JISG4311-91, JIS G4318-98, EN 10095-99, GB4226-84, EN10088-3-2005, JIS G4303-2005, etc

Available Material Grade

201 202 204 207 207CU 301 302 303 303B 304 304L 304N 308 308L 308 LSI 309 309L 309LSI 309S 309SI 310 310S 314 316 316L 316LSI 321 330 347 348 384 410 420 430

17-4 PH stainless steel round bars Range

Range – 3.17mm to 350mm dia

17-4 PH stainless steel round bars Diameter
2.0-400mm
17-4 PH stainless steel round bars Length
3000mm, 6000mm or according to the customer’s requirement.
17-4 PH stainless steel round bars Type
Round bar, rod, square bar, flat bar, hexagon bar, angle bar, channel bar, threaded bar
17-4 PH stainless steel round bars Technique
Forged/Hot Rolled/Cold Drawn/Peeled
17-4 PH stainless steel round bars Surface
bright round bar, pickled round bar, black round bar
Package Details
Standard seaworthy package(wooden boxes package,pvc package, or other package)
Export Area
USA, UAE, Europe, Asia, Middle East, Africa, South America

17-4PH STAINLESS STEEL ROUND BAR SPECIFICATIONS:

 

Trade Name: 17-4PH Stainless Steel Bar 
Standard : 
ASTM / ASME SA A582, A276, A564, ASTM A484, 484M
Surface: hrap, hot rolled pickled or sand blasting finished, cold drawn, bright, polished, hairline
Size: Tolerance: H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements 

Shape Manufactured: Flat Bar, Square Bar, Round Bar, Rings, Hollows, Blocks and special Shapes.

Test Certificate 
Mill Test Certificate as per EN 10204 / 3.1B

17-4PH STAINLESS STEEL BRIGHT BAR SPECIFICATIONS:

 

Trade Name: 17-4PH Stainless Steel Bar 
Standard : 
ASTM / ASME SA A582, A276, A564, ASTM A484, 484M
Surface: hrap, hot rolled pickled or sand blasting finished, cold drawn, bright, polished, hairline
Size: Tolerance: H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements 

Shape Manufactured: Flat Bar, Square Bar, Round Bar, Rings, Hollows, Blocks and special Shapes.

Test Certificate 
Mill Test Certificate as per EN 10204 / 3.1B

17-4PH STAINLESS STEEL SQUARE BAR SPECIFICATIONS:

 

Trade Name: 17-4PH Stainless Steel Bar 
Standard : 
ASTM / ASME SA A582, A276, A564, ASTM A484, 484M
Surface: hrap, hot rolled pickled or sand blasting finished, cold drawn, bright, polished, hairline
Size: Tolerance: H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements 

Shape Manufactured: Flat Bar, Square Bar, Round Bar, Rings, Hollows, Blocks and special Shapes.

Test Certificate 
Mill Test Certificate as per EN 10204 / 3.1B

17-4PH STAINLESS STEEL HEX BAR SPECIFICATIONS:

 

Trade Name: 17-4PH Stainless Steel Bar 
Standard : 
ASTM / ASME SA A582, A276, A564, ASTM A484, 484M
Surface: hrap, hot rolled pickled or sand blasting finished, cold drawn, bright, polished, hairline
Size: Tolerance: H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements 

Shape Manufactured: Flat Bar, Square Bar, Round Bar, Rings, Hollows, Blocks and special Shapes.

Test Certificate 
Mill Test Certificate as per EN 10204 / 3.1B

17-4PH STAINLESS STEEL RECTANGLE BAR SPECIFICATIONS:

 

Trade Name: 17-4PH Stainless Steel Bar 
Standard : 
ASTM / ASME SA A582, A276, A564, ASTM A484, 484M
Surface: hrap, hot rolled pickled or sand blasting finished, cold drawn, bright, polished, hairline
Size: Tolerance: H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements 

Shape Manufactured: Flat Bar, Square Bar, Round Bar, Rings, Hollows, Blocks and special Shapes.

Test Certificate 
Mill Test Certificate as per EN 10204 / 3.1B

17-4PH STAINLESS STEEL FLAT BAR SPECIFICATIONS:

 

Trade Name: 17-4PH Stainless Steel Bar 
Standard : 
ASTM / ASME SA A582, A276, A564, ASTM A484, 484M
Surface: hrap, hot rolled pickled or sand blasting finished, cold drawn, bright, polished, hairline
Size: Tolerance: H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements 

Shape Manufactured: Flat Bar, Square Bar, Round Bar, Rings, Hollows, Blocks and special Shapes.

Test Certificate 
Mill Test Certificate as per EN 10204 / 3.1B

17-4PH STAINLESS STEEL BLACK BAR SPECIFICATIONS:

 

Trade Name: 17-4PH Stainless Steel Bar 
Standard : 
ASTM / ASME SA A582, A276, A564, ASTM A484, 484M
Surface: hrap, hot rolled pickled or sand blasting finished, cold drawn, bright, polished, hairline
Size: Tolerance: H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements 

Shape Manufactured: Flat Bar, Square Bar, Round Bar, Rings, Hollows, Blocks and special Shapes.

Test Certificate 
Mill Test Certificate as per EN 10204 / 3.1B

17-4PH STAINLESS STEEL THREADED BAR SPECIFICATIONS:

 

Trade Name: 17-4PH Stainless Steel Bar 
Standard : 
ASTM / ASME SA A582, A276, A564, ASTM A484, 484M
Surface: hrap, hot rolled pickled or sand blasting finished, cold drawn, bright, polished, hairline
Size: Tolerance: H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements 

Shape Manufactured: Flat Bar, Square Bar, Round Bar, Rings, Hollows, Blocks and special Shapes.

Test Certificate 
Mill Test Certificate as per EN 10204 / 3.1B

17-4PH STAINLESS STEEL FORGED BAR SPECIFICATIONS:

 

Trade Name: 17-4PH Stainless Steel Bar 
Standard : 
ASTM / ASME SA A582, A276, A564, ASTM A484, 484M
Surface: hrap, hot rolled pickled or sand blasting finished, cold drawn, bright, polished, hairline
Size: Tolerance: H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements 

Shape Manufactured: Flat Bar, Square Bar, Round Bar, Rings, Hollows, Blocks and special Shapes.

Test Certificate 
Mill Test Certificate as per EN 10204 / 3.1B

17-4PH STAINLESS STEEL ROD BAR SPECIFICATIONS:

 

Trade Name: 17-4PH Stainless Steel Bar 
Standard : 
ASTM / ASME SA A582, A276, A564, ASTM A484, 484M
Surface: hrap, hot rolled pickled or sand blasting finished, cold drawn, bright, polished, hairline
Size: Tolerance: H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements 

Shape Manufactured: Flat Bar, Square Bar, Round Bar, Rings, Hollows, Blocks and special Shapes.

Test Certificate 
Mill Test Certificate as per EN 10204 / 3.1B

AVAILABLE STAINLESS STEEL ASTM A276 17-4 PH BARS EQUIVALENT GRADE

STANDARD WERKSTOFF NR. UNS JIS BS KS AFNOR EN
SS 17-4 PH 1.4542 S17400 SUS 630 S17400 Z6CNU17-04 X5CrNiCuNb16.4

OUR ASSOCIATE MANUFACTURER

AVAILABLE TYPES AISI, ASTM, JIS, DIN, GB, EN SS 17-4 PH BAR STOCK

17-4 PH STAINLESS STEEL BAR PRICE PER KG IN INDIA

Bar
Descriptions
Price in India(Approx)
Round Bars
Size: 1-10 mm, 10-20 mm, 20-30 mm, 30-40 mm, >40 mm
Show Price in INR175/Kilogram
Square Bars
TBA
Show Price in INRTBA
Hollow Bar
Single Piece Length: 3 meter, 6 meter
Show Price in INR280/Kilogram
Hex Bar
TBA
Show Price in INR280/Kilogram
Flat Bar
TBA
Show Price in INRRs. 650/ Kilogram
Bright Bar
TBA
Show Price in INRRs. 200/ Kilogram

Threaded Bar
TBA
Show Price in INRTBA
Rods
Single Piece Length: 3 meter, 6 meter
Show Price in INRRs. 180/ Kilogram
Shafts
TBA
Show Price in INRTBA
Angle Bar
TBA
Show Price in INRTBA

17-4 PH STAINLESS STEEL BAR COST IN INDIA

SS 17-4 PH BAR WEIGHT CALCULATIONS

Material Condition
Ultimate Tensile Strength (ksi) 0.2 % Yield Strength (ksi) Elongation % in 2D % Reduction of Area Rockwell C Hardness
Alloy 17-4 PH
Bar AMS 5643
Cond A 363 HB max
Alloy 17-4 PH
Bar AMS 5643
H900 190 170 10 40 388-444
Alloy 17-4 PH
Bar AMS 5643
H925 170 155 10 44 375-429
Alloy 17-4 PH
Bar AMS 5643
H1025 155 145 12 45 331-401
Alloy 17-4 PH
Bar AMS 5643
H1075 145 125 13 44 311-375
Alloy 17-4 PH
Bar AMS 5643
H1100 140 115 14 45 302-363
Alloy 17-4 PH
Bar AMS 5643
H1150 135 105 16 50 277-352
Material Condition
Ultimate Tensile Strength (ksi) 0.2 % Yield Strength (ksi) Elongation % in 2D (Values are for sheet <0.1874″ thick) % Reduction of Area Rockwell C Hardness
Alloy 17-4PH
Sheet/Plate AMS 5604
Cond A 38 max
Alloy 17-4PH
Sheet/Plate AMS 5604
H900 190 170 5 40-47
Alloy 17-4PH
Sheet/Plate AMS 5604
H925 170 155 5 38-45
Alloy 17-4PH
Sheet/Plate AMS 5604
H1025 155 145 5 35-42
Alloy 17-4PH
Sheet/Plate AMS 5604
H1075 145 125 5 33-39
Alloy 17-4PH
Sheet/Plate AMS 5604
H1100 140 115 5 32-38
Alloy 17-4PH
Sheet/Plate AMS 5604
H1150 135 105 8 28-37

SS BAR WEIGHT CALCULATOR

SS 17-4 PH BAR WEIGHT CALCULATOR


SS BAR WEIGHT FORMULA

SS BAR WEIGHT FORMULA

SS Round Bar Weight Calculation Formula
Round Bar Weight Formula
0.00623  X ( mm ) Diam X  ( mm ) Diam = Weight / Meter
0.0019  X ( mm ) Diam X  ( mm ) Diam = Weight / Feet

Square Bar Weight Formula

0.00788  X ( mm ) Diam X ( mm ) Diam = Weight / Meter
0.00240  X ( mm ) Diam X  ( mm ) Diam = Weight / Feet

Hexagonal Bar Weight Forumla
0.00680  X ( mm ) Diam X ( mm ) Diam = Weight / Meter
0.002072  X ( mm ) Width X  ( mm ) Diam = Weight / Feet

Flat Bar Weight Forumla
0.00798  X ( mm ) Thickness X ( mm ) Width = Weight / Meter
0.00243  X ( mm ) Width X  ( mm ) Thickness = Weight / Feet

SS BAR HS CODE

SS BAR HS CODE

HS code is called Harmonized System Code, Created by World Customs Organization (WCO).

WHAT IS 17-4 PH STAINLESS STEEL ROUND BAR HSN CODE

HS code in common, also known as HTS code in USA and NCM code in Brazil, HSN code in India.

First six digits of HSH Code, In all Countries are same.

  • First 2 digits – chapters
  • First 4 digits – heading
  • First 6 digits – sub heading

First six digits of HSH Code, In all Countries are same. However, some countries might include another 2 digits / 4 digits without modifying the first 6 digits, in process for detailed product description. This is the Reason some countries has 8 HS Codes of digits and 10 digits.

FIRST FOUR DIGITS HS CODE SS ROUND BAR

Heading Codes
Heading Description
7222
HS Codes Of Other Bars And Rods Of Stainless Steel; Angles, Shapes And Sections Of Stainless Steel First Six Digits HS Code SS Round Bar

FIRST SIX DIGITS HS CODE SS ROUND BAR

HS Codes
Products Description
722211
HS Codes of Of circular cross section :
722219
HS Codes of Other :
722220
HS Codes of Bars and rods, cold-formed/cold-finished :
722230
HS Codes of Other bars and rods :
722240
HS Codes of Angles, shapes and sections :

FIRST EIGHT DIGITS HS CODE SS ROUND BAR

HS Codes
Products Description
72221111
HS Codes Classification of Chromium type
72221112
HS Codes Classification of Nickel chromium austenitic type
72221119
HS Codes Classification of Other
72221191
HS Codes Classification of Chromium type
72221192
HS Codes Classification of Nickel chromium austenitic type
72221199
HS Codes Classification of Other
72221911
HS Codes Classification of Chromium type
72221912
HS Codes Classification of Nickel chromium austenitic type
72221919
HS Codes Classification of Other
72221991
HS Codes Classification of Chromium type
72221992
HS Codes Classification of Nickel chromium austenitic type
72221999
HS Codes Classification of Other
72222011
HS Codes Classification of Chromium type
72222012
HS Codes Classification of Nickel chromium austenitic type
72222019
HS Codes Classification of Other
72222091
HS Codes Classification of Chromium type
72222092
HS Codes Classification of Nickel chromium austenitic type
72222099
HS Codes Classification of Other
72223011
HS Codes Classification of Chromium type
72223012
HS Codes Classification of Nickel chromium austenitic type
72223019
HS Codes Classification of Other
72223091
HS Codes Classification of Chromium type
72223092
HS Codes Classification of Nickel chromium austenitic type
72223099
HS Codes Classification of Other
72224010
HS Codes Classification of Of thickness of 80 mm and above
72224020
HS Codes Classification of Of below 80 mm

STAINLESS STEEL 17-4 PH BAR

Stainless Steel 17-4 PH Round bar and the low carbon version 17-4 PH, which do not need post-weld annealing and so is commonly used in heavy gauge components at about 6mm. Grade 17-4 PHL which has higher carbon content used in application at elevated temperatures. The austenitic structure aids to support with excellent toughness, that also includes cryogenic temperatures.

STAINLESS STEEL 17-4 PH BAR PROPERTIES

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1300 – 1390 C 490 220 35% Min

 

GENERAL CHARACTERISTICS

17 – 4 PH steel is a martensitic precipitation or age-hardening stainless steel that combines high strength and hardness with excellent corrosion resistance. It may be age hardened by a single- step low- temperature treatment.

Alloy 17-4PH is a versatile precipitation-hardening steel showing excellent strength and corrosion-resisting characteristics. It is readily machinable, weldable and formable.

FORGING 4340 ALLOY STEEL

Forging of this grade should be carried out between 2150/2200 º F (1180/1200 º C) and 1850 º F (1010 º C.) For optimum grain size and mechanical properties, forgings should be air cooled to below 90 º F (32 º C) prior to further processing. Forgings must be solution treated prior to hardening.

HEAT TREATMENT

Type 17 – 4 PH alloy is hardened by heating solution-treated material, condition A, to between 900 º F (480 º C) and 1150 º F (620 º C) for one to four hours, depending upon the temperature, then air cooling.

SOLUTION TREATMENT

Heat at 1900 º F (1040 º C) for 30 minutes and cool to below 90 º F (32 º C) to allow complete transformation to martensite. Sections less than 3” may be quenched in a suitable liquid while those sections over 3” should be rapidly air cooled. Parts should not be used in the solution – treated condition due to possible problems with stress corrosion cracking.

AGE HARDENING

For condition H900 heat solution-treated material at 900 º F (480 º C) for 1 hour and air cool.

For conditions H925, H1025, H1075, H1100, H1150: heat solution-treated material at appropriate temperature ± 15ºF (± 8ºC) for 4 hours and air cool.

MACHINABILITY

17 – 4 PH grade is readily machinable in both the solution-treated and various age-hardened conditions. It machines similar to stainless 304 in the solution-treated condition. The machinability improves as the hardening temperature increases.

WELDABILITY

17 – 4 PH grade can be satisfactorily welded by the shielded fusion and resistance welding processes. Oxyacetylene welding is not recommended since carbon pick up may occur in the weld. If a filler metal is required a 17-4PH type welding rod should be used to provide welds with base-metal properties. If high strength is not required an austenitic stainless filler metal is satisfactory.

Welding in the solution-treated condition is normally satisfactory, but if high welding stresses are a possibility it may be best to weld in the overaged (H1150) condition. Preheating is not normally required to prevent cracking.

 

SS 17-4 PH BAR CHEMICAL COMPOSITION

CHEMICAL ANALYSIS
Mn
Manganese 1.00 max
P
Phosphorus 0.04 max
S
Sulfur 0.03 max
Si
Silicon 1.0
Cr
Chromium 15.0 – 17.5
Ni
Nickel 3.0 – 5.0
Cu
Copper 3.0 – 5.0
Cd + Ta
Cadmium + Tantulum 0.15 – 0.45

BUYERS OF STAINLESS STEEL 17-4 PH BAR

ASTM A276 17-4 PH Stainless Steel Round Bar Exporter In India

Stainless Steel Bar can be used for applications:

  • Screw machine products
  • Gears
  • Bearings
  • Fasteners
  • Fittings
  • Mining machinery
  • Food processing equipment
  • Shafts
  • Instruments
  • Screws
  • Valves
  • Aircraft parts, exhaust manifolds
  • Pump

Typical applications include:

  • Kitchen Benches, Troughs, Sinks, Equipment
  • Chemical Containers, For Transport
  • Threaded fasteners
  • Architectural Panelling
  • Railings & Trim
  • Heat Exchangers
  • Woven or welded screens for mining
  • Food Processing Equipment: Milk Processing
  • Food Processing Equipment: Beer Brewing
  • Food Processing Equipment: Wine Making
  • Springs
  • Quarrying
  • Water Filtration

  


BUYING TIPS

BUYING TIPS OF 17-4 PH STAINLESS STEEL BAR

10 Tips Before Buying Stainless Steel 17-4 PH Bar in India, Saudi Arabia, UAE, Korea, Indonesia, South Africa, Malaysia, Kuwait, Russia or anywhere in the world:

  1. Demand for Stainless Steel 17-4 PH Bar Mill Certificate
  2. Check After Sales Service through their existing clientile, Note: “buy small quantity first to check the service”
  3. Check Material with ASTM Standards
  4. Beware about Rejected Material, you can ask for Third Party Inspection For Assured Material
  5. For high quality choose ISO Certified Company
  6. Competitive Price
  7. Know about Product Replacement Policy
  8. Beware about used / surplus material
  9. Good Packing for sea and Air transport
  10. Purchase Directly from Manufacturers for Competitive Price & accurate materials

USEFUL INFORMATION

USEFUL INFORMATION OF 17-4 PH STAINLESS STEEL ROD

GENERAL CHARACTERISTICS

17 – 4 PH steel is a martensitic precipitation or age-hardening stainless steel that combines high strength and hardness with excellent corrosion resistance. It may be age hardened by a single- step low- temperature treatment.

Alloy 17-4PH is a versatile precipitation-hardening steel showing excellent strength and corrosion-resisting characteristics. It is readily machinable, weldable and formable.

FORGING 4340 ALLOY STEEL

Forging of this grade should be carried out between 2150/2200 º F (1180/1200 º C) and 1850 º F (1010 º C.) For optimum grain size and mechanical properties, forgings should be air cooled to below 90 º F (32 º C) prior to further processing. Forgings must be solution treated prior to hardening.

HEAT TREATMENT

Type 17 – 4 PH alloy is hardened by heating solution-treated material, condition A, to between 900 º F (480 º C) and 1150 º F (620 º C) for one to four hours, depending upon the temperature, then air cooling.

SOLUTION TREATMENT

Heat at 1900 º F (1040 º C) for 30 minutes and cool to below 90 º F (32 º C) to allow complete transformation to martensite. Sections less than 3” may be quenched in a suitable liquid while those sections over 3” should be rapidly air cooled. Parts should not be used in the solution – treated condition due to possible problems with stress corrosion cracking.

AGE HARDENING

For condition H900 heat solution-treated material at 900 º F (480 º C) for 1 hour and air cool.

For conditions H925, H1025, H1075, H1100, H1150: heat solution-treated material at appropriate temperature ± 15ºF (± 8ºC) for 4 hours and air cool.

MACHINABILITY

17 – 4 PH grade is readily machinable in both the solution-treated and various age-hardened conditions. It machines similar to stainless 304 in the solution-treated condition. The machinability improves as the hardening temperature increases.

WELDABILITY

17 – 4 PH grade can be satisfactorily welded by the shielded fusion and resistance welding processes. Oxyacetylene welding is not recommended since carbon pick up may occur in the weld. If a filler metal is required a 17-4PH type welding rod should be used to provide welds with base-metal properties. If high strength is not required an austenitic stainless filler metal is satisfactory.

Welding in the solution-treated condition is normally satisfactory, but if high welding stresses are a possibility it may be best to weld in the overaged (H1150) condition. Preheating is not normally required to prevent cracking.

SS ROUND BAR TOLERANCES

17-4 PH STAINLESS STEEL FLAT BAR & 17-4 PH STAINLESS STEEL HEX BAR TOLERANCES

Finish condition
Stainless Steel 17-4 PH Round Bar Tolerance class to ISO 286-2
h6
h7
h8
h9
h10
h11
h12
Drawn
R
R
R,S,H
R,S,H
Turned
R
R
R
R
Ground
R
R
R
R
R
R
R
Polished
R
R
R
R
R
R
R
R = Round; S = Square; H = Hexagon

What We Do

17-4 PH Stainless Steel Bar related products & stock
Bar & Rod, we manufacture, at a glance:

Stainless steel manufacturing grade at a glance:

List of Countries where Piyush Steel supply all size & grade Bright Bars / Rods:


17-4 PH STAINLESS STEEL ROD CASE STUDIES

This is about Our Client in Abu Dhabi City, We have exported 1 ton hot rolled bar to them on oct, 2016, Which was on Diwali (one of the important India’s Hindu Festival) We without any delay exported along with third party documents and Mill Certificate, at that time project chief engineer required 1 ton more cold drawn bar on emergency basis, on particular occasion factory 99% workers & staff gone for Diwali Vacation, Even I was out of town to celebrate Diwali, but Our Client requested me to do it on “first priority basis”. decided to take a flight on the auspicious day of Diwali Morning & Arranged to Export the Material on the Same Day, after satisfying the clients request we celebrated Diwali at my home happily. My Client from Dubai was really Amazed to see our material. Because in India no one was ready to ship the materials in Whole October due to Diwali, He sent me a Special Gift as complimentary, I felt very Happy that day! because we works 300 days out of 365 days.

ASTM A276 Stainless Steel 17-4 PH Round Bar Buyers

 


WHY CHOOSE PIYUSH STEEL

WHY CHOOSE PIYUSH STEEL TO BUY AISI, ASTM, DIN, JIS, GB, EN ROUND BARS

AVAILABLE SIZES

AVAILABLE 17-4 PH BAR SIZES :

GRADE 
Sizes
Availability
430F Stainless Steel Bar
6mm
Available
430F Stainless Steel Bar
8mm
Available
430F Stainless Steel Bar
10mm
Available
430F Stainless Steel Bar
12mm
Available
430F Stainless Steel Bar
13mm
Available
430F Stainless Steel Bar
16mm
Available
430F Stainless Steel Bar
19mm
Available
430F Stainless Steel Bar
22mm
Available
430F Stainless Steel Bar
28mm
Available
430F Stainless Steel Bar
40mm
Available
430F Stainless Steel Bar
60mm
Available
430F Stainless Steel Bar
75mm
Available
430F Stainless Steel Bar
90mm
Available
430F Stainless Steel Bar
120mm
Available
DIAMETER (INCHES)
PER INCH
PER FOOT
12 FT. BAR
1
.22
2.670
32.04
1.005
.22
2.696
32.38
1.010
.23
2.723
32.67
1 1/64
.23
2.750
33.00
1.020
.23
2.778
33.34
1 1/16
.25
3.014
36.17
1 3/32
.27
3.194
38.33
1 1/8
.28
3.379
40.55
1.135
.29
3.440
41.64
1 9/64
.29
3.470
41.64
1.145
.29
3.50
42.00
1 5/32
.30
3.570
42.84
1 3/16
.31
3.766
45.19
1 1/4
.35
4.173
50.08
1.260
.35
4.240
50.88
1 17/64
.36
4.276
51.31
1.275
.36
4.34
52.08
1 9/32
.37
4.384
52.60
1 5/16
.38
4.600
55.20
1 3/8
.42
5.049
60.59
1.385
.43
5.112
61.46
1 13/32
.44
5.279
63.35
1 7/16
.46
5.518
66.22
1 1/2
.50
6.008
72.10
1.510
.52
6.21
74.52
1 17/32
.52
6.261
75.13
1 9/16
.54
6.520
78.24
1 5/8
.59
7.051
84.61
1 11/16
.64
7.604
91.25
1 3/4
.68
8.178
98.14
1.770
.70
8.365
11.38
1 13/16
.73
8.773
105.30
1 7/8
.78
9.388
112.70
1 15/16
.84
10.02
120.20

DIAMETER (INCHES)

PER INCH
PER FOOT
12 FT. BAR
2
.89
10.68
128.20
2.020
.91
10.896
130.75
2 1/16
.95
11.36
136.30
2 1/8
1.01
12.06
144.70
2 3/16
1.07
12.78
153.40
2 1/4
1.13
13.52
162.20
2.270
1.15
13.76
165.12
2 5/16
1.19
14.28
171.40
2 3/8
1.26
15.06
180.70
2 7/16
1.33
15.87
190.40
2 1/2
1.39
16.69
200.30
2.520
1.41
16.957
203.48
2 9/16
1.46
17.53
210.40
2 5/8
1.54
18.40
2220
2 11/16
1.61
19.29
231.50
2 3/4
1.69
20.20
242.40
2.770
1.71
20.489
245.87
2 13/16
1.76
21.12
253.40
2 7/8
1.84
22.07
264.80
2 15/16
1.92
23.04
276.50
DIAMETER (INCHES)
PER INCH
PER FOOT
12 FT. BAR
3
2.01
24.03
288.40
3.020
2.03
24.345
292.25
3 1/16
2.09
25.05
300.60
3 1/8
2.18
26.08
312.90
3 3/16
2.27
27.13
325.60
3 1/4
2.36
28.21
338.50
3.270
2.38
28.551
342.61
3 5/16
2.45
29.30
351.60
3 3/8
2.54
30.42
365.00
3 7/16
2.64
31.55
378.60
3 1/2
2.73
32.71
392.50
3.520
2.76
33.082
396.99
3.530
2.77
33.273
399.25
3 5/8
2.93
35.09
421.10
3 11/16
3.03
36.31
435.70
3 3/4
3.14
37.55
450.60
3.770
3.16
37.948
455.39
3 7/8
3.35
40.10
481.20
3 15/16
3.45
41.40
496.80
DIAMETER (INCHES)
PER INCH
PER FOOT
12 FT. BAR
4
3.56
42.73
512.60
4.020
3.60
43.148
517.78
4.03
3.61
43.363
520.36
4 1/8
3.79
45.43
545.20
4 1/4
4.02
48.23
578.70
4 3/8
4.26
51.11
613.30
4 7/16
4.39
52.58
630.90
4 1/2
4.51
54.07
648.90
4.530
4.57
54.795
657.49
4 5/8
4.76
57.12
685.40
4 3/4
5.03
60.25
723.00
4 7/8
5.29
63.45
761.50
4 15/16
5.42
65.10
781.20
DIAMETER (INCHES)
PER INCH
PER FOOT
12 FT. BAR
5”
5.56
66.75
801.10
5 1/8”
5.84
70.13
841.60
5 1/4”
6.13
73.60
883.20
5 3/8”
6.43
77.15
925.70
5 7/16”
6.60
78.95
947.40
5 1/2”
6.73
80.77
969.20
5 5/8”
7.04
84.48
1,013.80
5 3/4”
7.36
88.29
1,059.00
5 15/16”
7.84
94.14
1,130.00
DIAMETER (INCHES)
PER INCH
PER FOOT
12 FT. BAR
6”
8.01
96.12
1,153.50
6 1/8”
8.35
100.2
1,202.40
6 1/4”
8.71
104.3
1,252.00
6 1/2”
9.40
112.8
1,353.80
6 3/4”
10.14
121.7
1,460.00
DIAMETER (INCHES)
PER INCH
PER FOOT
12 FT. BAR
7”
10.90
130.8
1,570.80
7 1/4”
11.70
140.4
1,684.10
7 1/2”
12.52
150.2
1,802.20
7 3/4”
13.36
160.4
1,924.40
DIAMETER (INCHES)
PER INCH
PER FOOT
12 FT. BAR
8”
14.24
170.9
2,050.60
8 1/4”
15.14
181.7
2,180.70
8 1/2”
16.08
192.9
2,315.00
8 3/4”
17.04
204.5
2,453.10
DIAMETER (INCHES)
PER INCH
PER FOOT
12 FT. BAR
9”
18.02
216.3
2,595.20
9 1/4”
19.04
228.5
2,741.40
9 1/2”
20.08
241.0
2,891.60
9 3/4”
21.15
253.8
3,045.80
DIAMETER (INCHES)
PER INCH
PER FOOT
12 FT. BAR
10”
22.25
267.0
3,204.00
10 1/2””
24.53
294.4
3,532.40
11”
26.92
324.0
3,876.80
11 1/2”
29.43
354.0
4,237.30
12”
32.04
384.48
4,613.76
12 1/2”
34.77
417.2
5,006.20
13”
37.60
451.23
5,414.76
13 1/2”
40.55
487.0
5,839.30
14”
43.61
523.32
6,279.84
15”
50.06
601.0
7,209.00
16”
56.96
684.0
8,202.20
17”
64.42
773.0
9,276.00
18”
72.17
866.0
10,392.00

EXPORTS QUANTITY WISE

STAINLESS STEEL 17-4 PH ROUND BAR EXPORTS QUANTITY WISE

OUR PRESENCE IN FOLLOWING CITIES AND COUNTRIES

Exporting to Following Cities :

Jakarta, Moscow, Lagos,Howrah, Aberdeen, La Victoria, Brisbane, Madrid, Vadodara, Atyrau, Vung Tau, Bengaluru, Coimbatore, Ulsan, Dallas, Granada, Kanpur, Pimpri-Chinchwad, London, Manama, Indore, Nagpur, Jeddah, Haryana, Nashik, Calgary, Houston, Cairo, Al Khobar, Rio de Janeiro, Riyadh,Tehran, Lahore, Bhopal, Jamshedpur, Ahvaz, Navi Mumbai, New Delhi, Petaling Jaya, Busan, Melbourne, Karachi, Noida, Geoje-si, Istanbul, Seoul, Mumbai, Ludhiana, Ranchi, Gimhae-si, Port-of-Spain, Edmonton, Kolkata, Visakhapatnam, Hanoi, Baroda, Secunderabad, Montreal, Doha, Surat, Faridabad, Sharjah, Ernakulam, Perth, Kuwait City, Mexico City, Thiruvananthapuram, Toronto, Milan, Santiago, Courbevoie, Kuala Lumpur, Hong Kong, Dubai, Chandigarh, Algiers, Thane, Bogota, Chiyoda, Gurgaon, Colombo, Bangkok, Caracas, Chennai, Singapore, Rajkot, Abu Dhabi, Al Jubail, Pune, Ahmedabad, Hyderabad, Los Angeles, Dammam, Jaipur, New York, Ankara, Ho Chi Minh City, Muscat, Sydney

Exporting to Following Countries : 

Poland, United Kingdom, Brazil, Pakistan, Tobago,Tunisia, United States, Zimbabwe,France, Bulgaria, Ecuador, Egypt, Sri Lanka, Poland, Switzerland, Oman, Colombia, India, Russia, Israel, Gambia, Canada, Taiwan, Romania, Turkey, Czech Republic, Jordan, New Zealand, Hungary, Lebanon, Finland, Mexico, Chile, Morocco, Bahrain, Kazakhstan, Gabon, Malaysia, Puerto Rico, Australia, Iran, Mexico, Argentina, Iraq, Germany, Kenya, Bhutan, Ukraine, Macau, Peru, Vietnam, Libya, Singapore, Angola, Costa Rica, Japan, Kuwait, Hong Kong, South Korea,Namibia, Netherlands, Tibet, Nepal, Iran, Portugal, China, Yemen, Venezuela, South Africa, Ghana, Denmark, Thailand, Slovakia, Estonia, Sweden, Mongolia, Afghanistan, Bolivia, Qatar, Belarus,Trinidad & Greece, Nigeria, Algeria, Croatia, United Arab Emirates, Serbia, Belgium, Bangladesh, Ireland, Indonesia, Saudi Arabia, Lithuania, Nigeria, Philippines, Chile, Norway, Azerbaijan, Italy, Austria, Spain