stainless steel round bar | stainless steel rods| steel bar | steel round bar | ss round bar| 1045 round bar | a36 round bar | 1018 round bar| Alloy steel round bar manufacturer & supplier

EN Series CS Round Bars, EN Series Carbon Steel Square Bars, EN Series Carbon Steel Threaded Bars, EN Series Carbon Steel Hexagonal Bars, Carbon Steel Round Bar, EN-44 Carbon Steel Bars, Carbon Steel EN36 Bar, Suppliers of EN-9 Carbon Steel Hex Bar, EN-351 Carbon Steel Forged Bars Exporter, Carbon Steel En Series Triangular Bar, Carbon Steel EN-8 Rods Suppliers and Dealer in Mumbai, India.

Carbon Steel En Series Round Bars, EN4140 Bars, Carbon Steel En Series Hexagonal Bar, Carbon Steel EN-1A Bright Bar, Carbon Steel EN-42 Square Bar, Carbon Steel EN-19(V 320) Round Bars Manufacturer in India.

Carbon Steel EN Series Specifications

Carbon Steel EN Series Round Bar
Specifications : ASTM A105, ASME SA105
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
Carbon Steel EN Series Round Bars
:  3.0 – 50.8 mm, Over 50.8 – 300mm
Carbon Steel EN Series Rectangular Bars
: 6.35 x 12.7mm,6.35 x 25.4mm,12.7 x 25.4mm
Carbon Steel EN Series Hex Bars : AF5.8mm–17mm
Carbon Steel EN Series Square Bars
: AF2mm – 14mm, AF6.35mm,9.5mm,12.7mm, 15.98mm,19.0mm, 25.4mm
Carbon Steel EN Series Flat Bars
: 1/2” to 10” in thickness range of 2mm to 150mm,
Finish : Bright, Polish & Black
Length : 1 to 6 Meters, Custom Cut Lengths
Form : Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.

CARBON STEEL HOT ROLLED FLAT BAR STOCK

En 24 Round Bar exporters in india

En 24 Round Bar

En 8 Bright Round Bar importers in india

En 8 Bright Round Bar

Aisi 4140 Steel Round Bar manufacturers in india

Aisi 4140 Steel Round Bar

En 16 Round Bar  exporters in india

En 16 Round Bar

flat bar importers in india

En 41 B Round Bar

En 19 Round Bar manufacturers in india

En 19 Round Bar

En 36 Round Bar exporters in india

En 36 Round Bar

EN 3 B Round Bar importers in india

EN 3 B Round Bar

EN 9 Round Bar manufacturers in india

EN 9 Round Bar

Chemical Composition of Carbon Steel En Series Round Bars

Grade
C% Si% Mn% Cr% Mo% W%
EN-1A 0.007 TO 0.15 0.10 0.80 TO 1.00 S P
0.20 TO 0.30 0.70 MAX
EN-8 0.35 TO 0.45 0.05 TO 0.30 0.60 TO 1.00 S P
0.06 MAX 0.06 MAX
EN-9 0.50 TO 0.60 0.05 TO 0.30 0.5 TO 0.80
EN-19(V 320) 0.35 TO 0.45 0.10 TO 0.30 0.5 TO 0.80 0.90 TO 1.40 0.20 TO 0.40
EN-24(V 130) 0.35 TO 0.45 0.10 TO 0.35 0.45 TO 0.70 0.90 TO 1.40 0.20 TO 0.35 NI
1.3 TO 1.8
EN-31 R-100 0.90 TO 1.20 0.10 TO 0.35 0.30 TO 0.75 1.00 TO 1.60
EN-36C E-200 0.12 TO 0.18 0.10 TO 0.35 0.30 TO 0.60 0.60 TO 1.10 NI
3.0 TO 3.75
EN-42 0.70 TO 0.85 0.10 TO 0.40 0.55 TO 0.75
EN-44 0.90 TO 1.20 0.30 0.45 TO 0.70
EN-45 F-110 50 TO 0.60 1.5 TO 2.0 0.70 TO 1.00
EN-351 0.10 TO 0.20 0.35 0.60 TO 1.00 0.40 to 0.80 0.08 to 0.10 NI
0.60 TO 1.00
EN-353 0.10 TO 0.20 0.35 0.50 TO 1.00 0.75 TO 1.25 0.08 to o.15 NI
1.00 TO 1.50

 

Carbon Steel En Series Bar HEAT TREATMENT

Grade HEAT TREATMENT CORRESPONDING SPECIFICATION
Hardening Temperature Quenching Medium Tempering Temperature Brinell Rock well hardness JAPAN JIS AISI POLDI THREAD
EN-1A
EN-8 750-900 OIL 150-200
EN-9 850-900 OIL 200-250 55-60
EN-19 (V 320) 900-950 OIL 200-225 45-55 SCM 4 4140
EN-24 (V 130) 830-860 OIL 540-680 45-55 SNCM 8 4340
EN-31 R-100 820-860 OIL 180-225 59-65
EN-36C
E-200
780-860 OIL 170-210 61-63 SNC 22 3415
EN-42 600-700 DIRECT HARDENING 40-45
EN-44 650-750 OIL 150 45-50
EN-45 830-860 OIL 470-520 50-55 9255
EN-351 850-860 OIL 175-200 62-64
EN-353 840-870 OIL 150-200 62-64

CHEMICAL ANALYSIS & HEAT TREATMENT

BOHLER VIEW CHEMICAL ANALYSIS % HEAT TREATMENT CORRESPONDING SPECIFICATIONS TYPICAL APPLICATIONS
C% Si% Mn% Cr% Mo% Ni% W% V% Co% Hardening Temperature Quenching Medium Tempering Temperature Brinell Rockwell Hardness JAPAN JIS AISI POLDI THREAD
EN-1A 0.07 TO 0.15 0.10 0.80 TO 1.00 S 0.20 to 0.30 P 0.70 Max Auto Parts,tools & Production Machine.
EN-8 0.35 TO 0.45 0.05 TO 0.30 0.60 TO 1.00 S 0.06 MAX P 0.06 MAX 750-900 OIL 150-200 Components of small cross section,requiring low tensile strength,as well as heavy forging in the normalised condition for automative & general engineering such as axels,clutch,shafts,presses & Punches Parts, Piston rods & gear rods.
EN-9 0.50 TO 0.60 0.05 TO 0.30 0.5 TO 0.80 850-900 OIL 200-250 55-60 Bolts, m/c Tool. Axial shaft
EN-19  (V 320) 0.35 TO 0.45 0.10 TO 0.30 0.50 TO 0.80 0.90 TO 1.40 0.20 TO 0.40 900-950 OIL 200-225 45-55 SCM 4 4140 Components of mediums & large cross section,requiring low tensile Strength,as well as heavy forging in the normalised condition for automatic engineering and gear & engine construction such as craneshafts stering knoking connecting
EN-24  (V 130) 0.35 TO 0.45 0.10 TO 0.35 0.45 TO 0.70 0.90 TO 1.40 0.20 TO 0.35 1-3 TO 1.8 830-860 OIL 540-680 45-55 SNCM 8 4340 Highly stressed components of large cross section for aircraft,automotive & general engineery application such as gears,crane shafts & heavy duty gearshaft in aircrafts & truck construction & mechanical engineering.
EN-31  R-100 0.90 TO 1.20 0.10 TO 0.35 0.30 TO 0.75 1.00 TO 1.60 820-860 OIL 180-225 59-65 For roller bearing components such as baks,cylinderical,conical & needle rollers.
EN-36B E-200 0.12 TO 0.18 0.10 TO 0.35 0.30 TO 0.60 0.60 TO 1.10 3.0 TO 3.75 780-860 OIL 170-210 61-63 SNC 22 3415 Components with large cross section,requiring high toughness & Score strength such as gears, crane shafts & heavy duty gearshafts in aircrafts & truck construction & mechanical engineering.
EN-42 0.70 TO 0.85 0.10 TO 0.40 0.55 TO 0.75 600-700 DIRECT HARDENING 40-45 Special gear case hardening tensils Tools.
EN-44 0.90 TO 1.20 0.30 0.45 TO 0.70 650-750 OIL 150 45-50 Spring action parts.
EN-45   F-110 0.50 TO 0.60 1.5 TO 2.0 0.70 TO 1.00 830-860 OIL 470-520 50-55 9255 Leaf & truncated conical springs for automate & general engineering.
EN-47 0.45 TO 0.55 0.50 0.50 TO 0.80 0.80 TO 1.20 0.15 MIN 6150 High duty volute and leaf springs, Heavy engine valve springs,Helical and torsional bar springs. It has a high ratio of yield point to tensile strength and torsional fatigue strength.
EN-351 0.10 TO 0.20 0.35 0.60 TO 1.00 0.40 TO 0.80 0.08 TO 0.10 0.60 TO 1.00 850-860 OIL 175-200 62-64 M/c spring parts
EN-353 0.10 TO 0.20 0.35 0.50 TO 1.00 0.75 TO 1.25 0.08 TO 0.15 1.00 TO 1.50 840-870 OIL 150-200 62-64 M/c components
SAE-8620 0.18 TO 0.23 0.20 TO 0.35 0.70 TO 0.90 0.40 TO 0.60 0.15 To 0.25 0.40 TO 0.70 780-820 OIL/AIR 150-200 Gears,Pinions,Lay shafts,Cambashafts,Mining haulage,Cage suspension,Lifting gears.Generally used for parts where direct hardening is prefered. It can also be used as an alternative to EN-35 and EN-36A Steel.